1:5:10:365 EcoTip Blog

September 22, 2008

:266 Finding Moisture Pockets

Welcome to today’s 1:5:10:365 Tip for becoming a better steward for our home and planet environment.

1:5:10:266 EcoTip: Thermal imaging using an infrared camera can help identify materials that are wet after flooding or water intrusion. Depending on the nature of the damage – many materials that look dry may in fact be wet. Capillary action and movement of water vapor can cause secondary damage that goes well beyond where the action water flowed. A thermal imaging scan can quickly help identify areas for investigation with a moisture meter. This can help identify pockets of moisture that might otherwise be missed. 

 

Thermal Image of a wet wall courtesy of Restoration Consultants at www.moistureview.com

***********************************

 Additional Information:

Suggested Review: :037, :256, :276, :258, :259, :260, :261, :262, :263, :264, :265

This is the eleventh in a series of EcoTips about working around buildings when participating in disaster recovery such as occurred with hurricane Katrina and is going on now with Ike. This information is timely since 2008 is the most active hurricane season since 2005 and many buildings are being damaged.

 

John Banta with Fluke thermal imaging camera from www.moistureview.com

 Would you like to receive an email alert for each new 1:5:10:365 EcoTip? Sign up for a Google Alert.

Advertisements

Blog at WordPress.com.